Restore your Holosun EPS Carry Red Dot Sight

Occasionally, you may require to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the settings or are experiencing unexpected behavior. Fortunately, resetting your Holosun is a straightforward process that can be achieved in just a few steps.

First ensuring your red dot sight is activated.
Identify the small button for reset on the rear of the sight.
Utilize a small object to press and hold the reset switch for approximately three seconds.
Release the lever and your Holosun EPS Carry Red Dot sight will restart.
Its red dot sight should now be reverted to its factory settings.

Restore Your Holosun EPS Carry Red Dot back to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to go back to basics, resetting it to default configuration is a breeze. First, find the tiny button on the bottom of your optic. Then, sustain it for around ten seconds until you see a brief flash. Your Holosun EPS Carry is now reset to its factory settings, ready for precise aiming.

revive your Holosun EPS Carry Back to Life

Is your beloved Holosun EPS Carry experiencing some glitches? Don't despair! A simple factory reset can often solve the problem and get your red dot sight back to its former glory. Before you begin, remember to disconnect the battery from your Holosun EPS Carry to prevent accidental activation during the process.

To perform a here factory reset on your Holosun EPS Carry, follow these easy steps:

Hold down the power button for approximately 7 seconds.
The display will flash, indicating that the reset is in progress.
Release the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can re-attach the battery and test your sight's functionality. If you encounter any further difficulties, don't hesitate to contactsupport team.

Restore Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Accomplish these steps carefully to ensure a successful factory reset.

First, Turn on your Holosun EPS Carry by pressing the power button.
After that, press and hold both the mode button and the up/down adjustment button simultaneously.
While continue holding these buttons, press the power button once.
You will show a confirmation prompt indicating that the reset process is initiated.
Allow the process to complete. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Erase All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Turning a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Factory Default". Select this option and confirm the reset. Your sight will then power off and restart with all settings Returned to their default values.

Restore your Holosun EPS Carry with a Factory Original Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the solution. This will return your sight to its initial settings, clearing any custom configurations you've made. To accomplish this reset, adhere to these straightforward steps:

Initially, find the reset switch on your EPS Carry.
Then, engage a fine object, like a pen tip, to push the reset lever.
During keep the reset button engaged, power on your EPS Carry.
It will display a message confirming that the reset is finished.

When the reset is complete, your EPS Carry will be set to its factory settings.